| 參考價 | 面議 |
NewClassic MS半微量天平將的性能和提高生產力進行了的結合，這一切都來源于快速的穩定時間以及一貫的可靠采用瑞士的高分辨率稱量技術(HRT)，保證了整個稱量范圍內的始終精確。創新左右手互換開關門(ErgoDoor)使樣品的稱量盡可能簡單和方便。內置日期和時間功能，進行符合GLP/GMP規范的打印輸出，確保您的研究的全面控制和可追溯性。
精確稱量：采用梅特勒-托利多高分辨率稱量技術(HRT)，內置兩組砝碼。配合全自動校準技術(FACT)，確保天平自動完成校正和線性化。
高效處理：減少每次稱量過程必須的操作步驟。左右手互換開關門(ErgoDoor)，實現一只手打開防風罩的同時，另一手進行加樣。
節約空間：折疊式玻璃防風門，為您節約了使用空間，避免凸出天平以外。天平背部的通訊接口可從側面進行連接。
易于清潔：天平清潔從未如此方便：通過防風罩鎖定裝置QuickLock)拆卸防風罩，僅需幾個步驟，并且所有防風罩玻璃和承水盤均可放入洗碗機清洗。
| Repeatability (sd) | 0.04 mg |
| Linearity | 0.1 mg |
| Sensitivity temperature drift (10-30°C) | 2 ppm/ °C |
| Stabilization time | 8 s / 4 s |
| Usable height of draft shield | 234 mm |
| Weighing pan dimensions | ø 80 mm |
| Balance dimensions LxWxH | 358x247x331 mm |
| Weight of balance | 6.6 kg |
| Repeatability (sd) at low load (20g) | 0.02 mg |
| Linearity (within 10 g), typical value | 0.02 mg |
| Minimum weight (acc. to USP), typical value | 45 mg |
| Minimum weight (acc. to 1%, k=2), typical value | 3 mg |
| Material Number(s) |
| Repeatability (sd) | 0.08 mg |
| Repeatability (sd), fine range | 0.03 mg |
| Linearity | 0.15 mg |
| Sensitivity temperature drift (10-30°C) | 2 ppm/ °C |
| Stabilization time | 8 s / 4 s |
| Usable height of draft shield | 234 mm |
| Weighing pan dimensions | ø 80 mm |
| Balance dimensions LxWxH | 358x247x331 mm |
| Weight of balance | 6.6 kg |
| Repeatability (sd), fine range at low load (20g) | 0.02 mg |
| Linearity (within 10 g), typical value | 0.02 mg |
| Minimum weight (acc. to USP), typical value | 45 mg |
| Minimum weight (acc. to 1%, k=2), typical value | 3 mg |
| Material Number(s) |
| Repeatability (sd) | 0.08 mg |
| Repeatability (sd), fine range | 0.05 mg |
| Linearity | 0.2 mg |
| Sensitivity temperature drift (10-30°C) | 2 ppm/ °C |
| Stabilization time | 8 s / 4 s |
| Usable height of draft shield | 234 mm |
| Weighing pan dimensions | ø 80 mm |
| Balance dimensions LxWxH | 358x247x331 mm |
| Weight of balance | 6.6 kg |
| Repeatability (sd), fine range at low load (20g) | 0.02 mg |
| Linearity (within 10 g), typical value | 0.02 mg |
| Minimum weight (acc. to USP), typical value | 45 mg |
| Minimum weight (acc. to 1%, k=2), typical value | 3 mg |
| Material Number(s) |
|
|
|
|
|
|
*您想獲取產品的資料：
個人信息：
