移動端
直播推薦
回放
回放
摘要：智能照明控制系統在現階段的應用越來越廣泛，本文通過介紹了安科瑞智能照明控制系統在某機房管理中心的具體應用，簡析KNX技術的設計規范，概述Acrel-Bus智能照明控制系統的具體架構、控制方式等。KNX技術主要用于住宅、樓宇等大型公建項目的控制領域，該系統的優點是在系統調試維護時，系統的結構清晰方便，當系統某個部分出現故障時，其他部分任能夠繼續工作，提高系統的可靠性能。
Abstract: Intelligent lighting control system is more and more widely used at this stage. This article introduces the specific application of Acrel intelligent lighting control system in a computer room management center, briefly analyzes the design specifications of KNX technology, and outlines Acrel-Bus intelligent lighting The specific structure and control method of the control system. KNX technology is mainly used in the control field of large public construction projects such as houses and buildings. The most significant advantage of this system is that the structure of the system is clear and convenient during system debugging and maintenance. When a certain part of the system fails, other parts can continue Work to improve the safety and reliability of the system.
關鍵詞：機房管理中心；智能照明系統；節能減排；照明控制；
Keywords: computer room management center; intelligent lighting system; energy saving and emission reduction; lighting control;
0.前言 Background
安科瑞智能照明控制系統基于KNX總線技術，采用四芯屏蔽雙絞線將面板、傳感器、驅動器和總線電源等所有的控制模塊手拉手連接起來，將各種獨立的控制功能集成到一個系統中，集舒服、靈活、節能經濟、維護方便等諸多優勢于一體。
智能便捷的控制方式還可以滿足機房的各種控制需求。下面介紹安科瑞智能照明控制系統在某機房管理中心的設計與應用，簡析KNX技術的設計規范，概述安科瑞智能照明控制系統的具體架構、控制方式等。
Acrel intelligent lighting control system is based on KNX bus technology, and uses four-core shielded twisted pair wires to connect all control modules such as panels, sensors, drivers and bus power supply hand in hand, integrating various independent control functions into one system , It integrates many advantages such as comfort, flexibility, safety, energy saving and economy, and convenient maintenance.
The intelligent and convenient control method can also meet the various control needs of the computer room. The following introduces the design and application of Acrel's intelligent lighting control system in a computer room management center, briefly analyzes the design specifications of KNX technology, and outlines the specific architecture and control methods of Acrel's intelligent lighting control system.
1.系統組成System Composition
系統組成結構圖如下，總線電源、驅動器、網關、耦合器、輸入模塊等需安裝在配電箱內，傳感器一般安裝在公共區，面板和觸摸屏一般安裝在房間值班室內。注意各模塊接線不能組成環形。相對小型的項目，系統可選用10寸中控屏，它無需IP網關轉換協議，設置簡單且成本低。對于相對大型的項目，可通過IP網關連接到電腦，實現終端遠程控制。
The system composition structure diagram is as follows. The bus power supply, driver, gateway, coupler, input module, etc. need to be installed in the distribution box. The sensor is generally installed in the public area, and the panel and touch screen are generally installed in the room on duty. Note that the wiring of each module cannot form a ring. For relatively small projects, the system can choose a 10-inch central control screen, which does not require an IP gateway conversion protocol, and is simple to set up and low in cost. For relatively large projects, it can be connected to a computer through an IP gateway to realize remote control of the terminal.
2.系統功能System function
該產品有多種控制方式可供選擇，可滿足不同客戶的需求。如本地控制、自動感應控制、定時控制、遠程集中控制等，控制方式更靈活，在實現自動化的同時，大量減少了值班人員的管理費用，提高了管理水平和工作效率。
2.1定時控制
通過時鐘管理器，實現整個系統的有關區域照明的定時和自動管理功能，實現公共通道、景觀照明、泛光照明、車庫照明定時控制。如百葉窗定時升降、集中供熱定時調節、節假日照明定時關閉、定時通知等。
2.2場景控制
智能照明控制系統根據各個部門的需求，設定不同種類的場景模式，進行各種照明燈光的組合，達到工作環境的效果；結合人體感應傳感器，當人員離開時，關閉所有該會議室照明。
2.3實時監控
控制室，配置一臺中控主機，所有照明控制設備，通過KNX網關，接入監控系統，操作管理人員，可以通過中控電腦，實時監視總線、區域、樓層、樓棟等照明狀態，并可根據需求進行控制調整。系統繪圖工具支持向量圖和多層頁面，圖形頁面縮放方便，切換簡單，支持DXF、WMF、BMP、JPG、ICON等圖形對象的嵌入、支持二維、三維圖元的繪制，增加可視化的空間效果。
2.4報警處理
系統提供了警報處理能力，用戶可采用編程來完成不同的任務，當某種警報條件出現時應做什么，可由用戶自行確定。
2.5事件通報
系統提供了事件通報功能，支持郵件通報、文本輸出以及事件驅動打印，可按照用戶預先設置的條件，觸發事件通報功能。
The product has a variety of control methods to choose from, which can meet the needs of different customers. Such as local control, automatic induction control, timing control, remote centralized control, etc., the control method is more flexible. While realizing automation, it greatly reduces the management cost of the staff on duty, and improves the management level and work efficiency.
2.1 Timing control
Through the clock manager, the timing and automatic management functions of the related area lighting of the entire system are realized, and the timing control of public passage, landscape lighting, flood lighting, and garage lighting is realized. For example, the blinds are regularly raised and lowered, centralized heating timing adjustment, holiday lighting timing closure, timing notification, etc.
2.2 Scene control
The intelligent lighting control system sets different types of scene modes according to the needs of various departments, and combines various lighting lights to achieve the effect of beautifying the working environment; combined with the human body sensor sensor, when the personnel leave, all the lighting in the meeting room is turned off.
2.3 Real-time monitoring
The central control room is equipped with a central control host, and all lighting control equipment is connected to the monitoring system through the KNX gateway. The operation and management personnel can monitor the lighting status of the bus, area, floor, building, etc. in real time through the central control computer. Control and adjust according to demand. The system drawing tools support vector graphics and multi-layer pages. The graphics page is easy to zoom and switch. It supports the embedding of graphic objects such as DXF, WMF, BMP, JPG, ICON, etc., supports the drawing of 2D and 3D primitives, and increases the visual spatial effect. .
2.4 Alarm processing
The system provides alarm processing capabilities. Users can use programming to complete different tasks. What should be done when a certain alarm condition occurs can be determined by the user.
2.5 Incident notification
The system provides an event notification function, supports notification, text output, and event-driven printing, and can trigger the event notification function according to conditions preset by the user.
3.系統的優點 Advantages of the system
1.系統可通過手機、觸摸屏、電腦對現場的燈光、空調及窗簾等進行遠程集中控制，使得控制更加方便智能，用戶體驗更好。
2.系統中控制模塊均工作在 直流30V 電壓下，用戶操作更加方便。
3.系統在實施過程中，盡量充分結合自然光及人員的活動規律來自動控制燈光，可減少能源消耗，達到很好的節能效果。
4.系統采用分布式KNX總線結構，搭建簡單靈活，系統內各模塊互不影響，可獨立工作，系統可靠性更高。
5.多種控制方式可供選擇，如本地控制、自動感應控制、定時控制、 場景控制和集中控制等，控制方式更靈活。
6.系統的自動控制、遠程集中控制等功能，在實現自動化的同時，大量減少了值班人員的管理費用，提高了管理水平和工作效率。
7.升級系統內控制模塊或更改系統功能時，無需增加連接線，不需關閉整個系統，只需更改設備參數即可實現，維護方便，操作簡單。
8.系統可與消防系統聯動，在出現消防報警時，強制打開應急回路，方便人員疏散，從而降低了人員傷亡的風險。
1. The system can remotely and centrally control the on-site lighting, air conditioning and curtains through phones, touch screens, and computers, making the control more convenient and intelligent, and the user experience more perfect.
2. The control modules in the system all work under the safe voltage of DC 30V, which makes the user's operation safer and more comfortable.
3. During the implementation of the system, try to fully combine natural light and personnel's activity rules to automatically control the lights, which can minimize energy consumption and achieve good energy-saving effects.
4. The system adopts the distributed KNX bus structure, which is simple and flexible to build. The modules in the system do not affect each other, can work independently, and the system reliability is higher.
5. A variety of control methods are available, such as local control, automatic induction control, timing control, scene control and centralized control, etc. The control method is more flexible.
6. The system's automatic control, remote centralized control and other functions, while realizing automation, greatly reduce the management cost of the staff on duty, and improve the management level and work efficiency.
7. When upgrading the control module in the system or changing the system function, there is no need to increase the connection line or shut down the entire system. It can be realized by only changing the equipment parameters. The maintenance is convenient and the operation is simple.
8. The system can be linked with the fire fighting system. When a fire alarm occurs, the emergency circuit is forced to open to facilitate the evacuation of personnel, thereby reducing the risk of casualties and improving the safety of the building.
4.智能照明模塊描述 Description of smart lighting control module
上圖是Acrel總線智能照明控制系統的結構類型圖。 系統架構采用分層結構，主要在以下三個方面具有優勢：
（1）提高系統可靠性。當每個區域和每條線路都分配有KNX電源時，當系統的某個部分出現問題時，電氣隔離可使其他部分繼續運行。
（2）一條線或一個區域內的數據通信不會影響其他區域的通信。
（3）在系統調試和維護過程中，系統結構清晰，維護效率高。
The above is the structural typology diagram of Acrel-bus smart lighting control system. The system architecture adopts layered structure, advantageous mainly in the following three aspects:
(1)Enhancing system reliability. As each area and each line is distributed with KNX power, the electric isolation enables other parts to continue with operation when something goes wrong with one part of the system.
(2)The data communication within one line or one area will not affect communication in other areas.
(3)During system commissioning and maintenance, a clear system structure will provides high maintenance efficiency.
5.安裝圖片Installation Site
6.結束語 Ending
隨著社會的發展及電力的廣泛應用，安科瑞智能照明監控系統已成為全國各地重要工程項目、標志性建筑、大型公共設施等大面積多用戶的選擇。智能照明系統在建筑中的節能方式，通過加強管理節約成本、利于自然光源、照明系統資源共享等方式來實現資源的節約。智能照明系統的優點和實用性有很多，同時智能照明系統也在不斷地發展完善，未來建筑將會使用智能照明系統來控制照明。
With the development of society and the widespread application of electric power, Acrel's intelligent lighting monitoring system has become the choice for large-scale and multi-users such as important engineering projects, landmark buildings, and large-scale public facilities throughout the country. The energy-saving method of intelligent lighting system in buildings realizes resource saving by strengthening management, saving costs, effectively benefiting natural light sources, and sharing lighting system resources. There are many advantages and practicability of intelligent lighting system. At the same time, intelligent lighting system is constantly developing and improving. In the future, buildings will use intelligent lighting system to control lighting in an all-round way.
編輯：安科瑞 孫斌
公司：江蘇安科瑞電器制造有限公司
免責聲明
- 凡本網注明“來源：儀器網”的所有作品，均為浙江興旺寶明通網絡有限公司-儀器網合法擁有版權或有權使用的作品，未經本網授權不得轉載、摘編或利用其它方式使用上述作品。已經本網授權使用作品的，應在授權范圍內使用，并注明“來源：儀器網”。違反上述聲明者，本網將追究其相關法律責任。
- 本網轉載并注明自其他來源（非儀器網）的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點和對其真實性負責，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品第一來源，并自負版權等法律責任。
- 如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。
浙公網安備 33010602002722號
第62屆中國高等教育博覽會
展會城市：重慶市展會時間：2024-11-15