Mixers OverheadStirrers (Advanced Model)
攪拌器置頂攪拌器（型）
Overhead Stirrers (Advanced Model)
置頂攪拌器（型）
Ideally perform your professional stirring tasks requiring highfunctionality, safety, and longevity.
具有多功能、安全和長壽命特點，是實驗室的理想選擇。
Intelligent speed controller enablesreproducible results under varying viscosity condition.
智能速度控制器使得在各種粘度條件下都能保持狀態。
your high standard sitrring needs can bemet by our considerate design and safety features.
人性化的設計和多種安全功能能夠滿足用戶的高標準要求。
型號
MSH-0512
Features
特點
Features
特點
· Years of vibration-free and silent operation.
· 長年保持無振動和式操作。
- Equipped with a maintenance-free BLDC motor to generate smooth, quiet, andyet powerful stirring.
· -免維護的直流無刷電機具有平穩、、和強勁有力的特點。
· Maintenance of constant motor speed byPID feedback control system even under conditions of changing viscosity.
· 即使在粘度變化的條件下，PID反饋控制系統也能夠使電機保持恒定不變的速度。
· Powerful torque capable of handling highviscosity tasks. In addition, the varying motor torque is indicated on displayin real time.
· 大扭矩能夠滿足高粘度要求，電機扭矩可以實時在顯示屏顯示。
· Motor temperature condition is indicatedon display by three different colors to protect motor.
· 電機溫度可以以三種不同顏色顯示在顯示屏上，可以保護電機。
· Stirring directions are selectabledepending on each impeller’s shape and the set direction is visible on display.
· 顯示屏可以設置逆時針或者順時針方向旋轉滿足不同形狀葉輪的要求，并且能在顯示屏顯示。
· Screen lock function prevents accidentalchanges during operation.
· 屏幕鎖定功能，防止未經的更改。
· Best effort function Intelligentlymanages its stirring speed to keep stirring even workload is out of itscapacity.
· 即使超過工作負荷，系統智能調節轉速繼續工作。
· Safety features against overload andoverheating.
· 有超載和過熱安全保護功能。
- When it comes to heavy workload, it tries to activate best effort function.But if it determines that performing the work is harmful for it, than it stopsstirring.
· -當系統感應到超負荷工作時，會自動以狀態運行。但是當感應
- Equiped with a mini fan inside to minimize overheating of the motor.
· -內部有迷你風扇可以給電機散熱。
· Prevention of accidental spills orsplashes thanks to microprocessor controlled smooth start and stop functions.
· 微處理控制器平穩的啟動和停機
· Separated adapter from the main bodyminimizes the risks of electrical hazards to the users.
· 獨立于主機的電源適配器，可以減少對操作者的電氣危害。
· Built-in USB port for external controlａnd data collection. (Lab Companion software required)
· 內置USB接口，可以外聯控制和數據收集。（需要軟件）
Specifications
技術參數
Model 型號 | MSH-0512 |
Technical Data 技術參數 | Speed Control 速度控制系統 | PID feedback control PID反饋控制系統 |
Speed Range (rpm) 轉速范圍(rpm) | 50 ~ 1,200 50 ~ 1,200 |
Display 顯示器 | Digital-LCD 數字顯示-LCD |
Stirring Capacity, Max.
(L, H2O) 攪拌量(L, 水) | 20 |
Torque, Max. (N?cm) 扭矩(N?cm) | 41.6 |
Motor Rating Output (W) 電機輸出功率(W) | 50 |
General Data 其它參數 | Body Material 主機材質 | Aluminum + PP 鋁 + PP |
Dimension
(mm / inch, W×D×H) 主機尺寸(mm / inch, W×D×H) | 80x181x235 / 3.14×7.13×9.25 |
Net Weight (Kg / lbs) 凈重(Kg / lbs) | 3.1 / 6.83 |
Electrical Requirements 電源要求 | AC 100 ~ 240V, 50 / 60Hz |
Safety Device 安全保護 | Thermal protection, Current protection, Emergency stop, Automatic speed control 加熱保護，電流過載保護，緊急停機，自動調速 |
Shaft Die, Max (mm / Inch) 夾軸尺寸(mm / Inch) | 3 ~ 10 / 0.12 ~ 0.39 |
Protection Class
(DIN EN 60529) 保護等級(DIN EN 60529) | IP20 |
Cat. No. 貨號 | KR plug 韓式插頭 | AAH371415K |
US plug 美式插頭 | AAH371415U |
※ Permissible environmental conditions: temperature (5-40℃) ａnd relative humidity (up to 80%).
※工作溫度：5℃ - 40℃，相關濕度：80%
※ Protection class according to DINEN 60529: waterproof, Dust production index based onthe test level.
※ 保護等級符合DIN EN 60529標準：防水，粉塵指數符合測試標準。
※ Above specifications can bechanged without prior notice.
※ 由于參數不斷更新，如若未通知請諒解。
Accessories& Options
選配件
Impeller
葉輪
Propeller Impeller
螺旋槳式葉輪
Standard grade stainless steel withTeflon shaft produces anaxial flow stir between the bottom and top levels of asample with local shearing force. Used at medium or high speeds for mixingnormal range level viscosity samples.
特氟隆軸的不銹鋼葉輪可以在樣品的底部和頂部之間形成局部剪切力式的流向攪拌。調至中速或者高速適合一般粘性樣品的混勻。
Turbine Impeller
渦輪式葉輪
A radial flowing stir from the top andbottom levels of a sample with a powerful, high shearing turbulent force. Usedideally for the gassing of liquids and mixing medium to high range levelviscosity samples.
可以使樣品的頂部和底部形成強大的湍流剪切力式徑向流動攪拌。調至高速能使液體析出氣體，適合混勻高粘性樣品。
Half-Moon &Centrifugal
半月式和離心式葉輪
Tiltable moon-shaped and blade shaftproduces a normal axial flow percentage mixing of samples. Used with roundbottom shaped containers, medium mixing speed, and samples ranging from low tomedium viscosity levels.
可傾斜的月形和葉片形葉輪可以產生的軸向混勻效果?？梢赃\用于底部為圓形的容器，中速適用中低粘性混勻。
Anchor and PaddleImpeller
錨式和槳式葉輪
An anchored shaft that produces a strong tangential flow with a highshearing percentage force on samples with medium to high viscosity level withspeed setting in the low to medium range.
錨式葉輪可以產生強大的切向流動攪拌。中低速適用中高粘性混勻。
PTFE Impeller
PTFE葉輪
Propeller Impeller
螺旋槳式葉輪
Turbine Impeller
渦輪式葉輪
Half-Moon & Centrifugal
半月式和離心式葉輪
Anchor and PaddleImpeller
錨式和槳式葉輪
Cat. No. 貨號 | Description 描述 |
AAA37521 | Propeller (50mm 3-Bladed, 8mm Shaft, 400mm Length) 螺旋槳式葉輪(3葉片式直徑：50mm, 軸直徑：8mm, 軸長度：400mm) |
AAA37522 | Propeller (70mm 3-Bladed, 8mm Shaft, 400mm Length) 螺旋槳式葉輪(3葉片式直徑：70mm, 軸直徑：8mm, 軸長度：400mm) |
AAA37523 | Propeller (100mm 3-Bladed, 8mm Shaft, 400mm Length) 螺旋槳式葉輪(3葉片式直徑：100mm, 軸直徑：8mm, 軸長度：400mm) |
AAA37531 | Propeller (50mm 4-Bladed, 8mm Shaft, 400mm Length) 螺旋槳式葉輪(4葉片式直徑：50mm, 軸直徑：8mm, 軸長度：400mm) |
AAA37532 | Propeller (70mm 4-Bladed, 8mm Shaft, 400mm Length) 螺旋槳式葉輪(4葉片式直徑：70mm, 軸直徑：8mm, 軸長度：400mm) |
AAA37533 | Propeller (100mm 4-Bladed, 8mm Shaft, 400mm Length) 螺旋槳式葉輪(4葉片式直徑：100mm, 軸直徑：8mm, 軸長度：400mm) |
AAA37541 | Half-Moon (65/20mm , 8mm Shaft, 300mm Length) 半月式葉輪(葉片直徑：65/20mm , 軸直徑：8mm, 軸長度：300mm) |
AAA37542 | Half-Moon (90/25mm , 8mm Shaft, 500mm Length) 半月式葉輪(葉片直徑：90/25mm , 軸直徑：8mm, 軸長度：500mm) |
BEA0570031 | Dissolver (55mm, 8mm Shaft, 350mm Length) 溶解式葉輪(葉片直徑：55mm, 軸直徑：8mm, 軸長度：350mm) |
BEA0570032 | Dissolver (75mm, 8mm Shaft, 350mm Length) 溶解式葉輪(葉片直徑：75mm, 軸直徑：8mm, 軸長度：350mm) |
AAA37551 | Centrifugal (50/15mm, 8mm Shaft, 500mm Length) 離心式葉輪(葉片直徑：50/15mm, 軸直徑8mm, 軸長度：500mm) |
AAA37552 | Centrifugal (80/15mm, 8mm Shaft, 500mm Length) 離心式葉輪(葉片直徑：80/15mm, 軸直徑8mm, 軸長度：500mm) |
AAA37561 | Turbine (40mm, 8mm Shaft, 500mm Length) 渦輪式葉輪(葉片直徑：40mm, 軸直徑：8mm, 軸長度：500mm) |
AAA37562 | Turbine (70mm, 8mm Shaft, 500mm Length) 渦輪式葉輪(葉片直徑：40mm, 軸直徑：8mm, 軸長度：500mm) |
AAA37571 | Anchor (45×45mm, 8mm Shaft, 300mm Length) 錨式葉輪(葉片尺寸：45×45mm, 軸直徑：8mm, 軸長度：300mm) |
AAA37572 | Anchor (60×60mm, 8mm Shaft, 500mm Length) 錨式葉輪(葉片尺寸：60×60mm, 軸直徑：8mm, 軸長度：500mm) |
AAA37581 | Paddle A (70×70mm, 8mm Shaft, 500mm Length) 槳A式葉輪(葉片尺寸：70×70mm, 軸直徑：8mm, 軸長度500mm) |
BEA0570081 | PTFE Propeller (50mm 4-Bladed, 8mm Shaft, 500mm Length) PTFE螺旋槳式葉輪(4葉片式直徑：80mm, 軸直徑：8mm, 軸長度：500mm) |
BEA0570082 | PTFE Propeller (70mm 4-Bladed, 8mm Shaft, 500mm Length) PTFE螺旋槳式葉輪(4葉片式直徑：70mm, 軸直徑：8mm, 軸長度：500mm) |
BEA0570091 | PTFE Half-Moon (60 / 18mm , 8mm Shaft, 500mm Length) PTFE半月式葉輪(葉片直徑：60/18mm , 軸直徑：8mm, 軸長度：500mm) |
BEA0570101 | PTFE Centrifugal (76 / 17mm, 8mm Shaft, 500mm Length) PTFE離心式葉輪(葉片直徑：76/17mm, 軸直徑8mm, 軸長度：500mm) |
BEA0570111 | PTFE Anchor (80×50×5[j1] mm, 8mm Shaft, 500mm Length) PTFE錨式葉輪(葉片尺寸：80×50mm, 軸直徑：8mm, 軸長度：500mm) |
BEA0570121 | PTFE Anchor (80×40mm, 8mm Shaft, 500mm Length) PTFE錨式葉輪(葉片尺寸：80×40mm, 軸直徑：8mm, 軸長度：500mm) |
BEA0570131 | PTFE Turbine (70mm, 8mm Shaft, 500mm Length) PTFE渦輪式葉輪(葉片直徑：70mm, 軸直徑：8mm, 軸長度：500mm) |
BEA0570141 | PTFE Paddle (70mm, 8mm Shaft, 500mm Length) PTFE槳式葉輪(葉片直徑：70mm, 軸直徑：8mm, 軸長度500mm) |
BEA0570151 | PTFE Paddle A (78×80mm, 8mm Shaft, 500mm Length) PTFE槳A式葉輪(葉片尺寸：78×80mm, 軸直徑：8mm, 軸長度500mm) |
Dial Stand
刻度底座
Basic Stａnd 1
基礎型底座 1
Basic Stａnd 2
基礎型底座 2
Basic Stａnd 3
基礎型底座 3
Clamp
夾持器
Clamp Holder(C-20, C-10)
夾持器(C-20, C-10)
Utility Clamp 3Prong
3爪萬用夾
Utility Clamp Plat
板型爪萬用夾
PTFE Stirring seals
PTFE攪拌密封蓋
PTFE Stirringseals
PTFE攪拌密封蓋
Prong Clamp, Fixing Clamp, Flexible Coupling
夾持器、固定夾、柔性接頭
C3 Prong Clamp
3爪夾
2 Prong Clamp
2爪夾
Fixing Clamp
固定夾
Flexible Coupling
柔性接頭
Cat. No. 貨號 | Description 描述 |
AAA37501 | Dial Stａnd (W×D×H, 400×400×700) 刻度底座(W×D×H, 400×400×700) |
AAA37502 | Basic Stａnd 1 (W×D×H, 400×400×700) 基礎型底座 1 (W×D×H, 400×400×700) |
AAA37503 | Basic Stａnd 2 (W×D×H, 300×400×700) 基礎型底座 2 (W×D×H, 300×400×700) |
AAA37504 | Basic Stａnd 3 (W×D×H, 250×350×700) 基礎底座 3 (W×D×H, 250×350×700) |
MSS0051 | 15? Support Rod, 500mm, M14 Nut 支撐桿直徑：15?，長度：500mm, 螺母：M14 |
MSS0052 | 18? Support Rod, 500mm, M14 Nut 支撐桿直徑：18?，長度：500mm, 螺母：M14 |
MSS0053 | 20? Support Rod, 500mm, M14 Nut 支撐桿直徑：20?，長度：500mm, 螺母：M14 |
BEA0570161 | PTFE Stirring Seals (24 / 40) PTFE攪拌密封蓋(24 / 40) |
BEA0570162 | PTFE Stirring Seals (29 / 42) PTFE攪拌密封蓋(29 / 42) |
BEA0570163 | PTFE Stirring Seals (34 / 45) PTFE攪拌密封蓋(34 / 45) |
AAA37512 | Clamp Holder, C-10 (Al body, ?17mm) 夾持器， C-10 (鋁質，?17mm) |
AAA37511 | Clamp Holder, C-20 (Al body, ?27mm) 夾持器， C-20 (鋁質，?27mm) |
BEA1000001 | Utility Clamp 3 Prong 3爪萬用夾 |
BEA1000002 | Utility Clamp Plat 板型爪萬用夾 |
BEA1000011 | 3 Prong Clamp (80mm grip) 3爪夾（爪長：80mm） |
BEA1000012 | 3 Prong Clamp (60mm grip) 3爪夾（爪長：60mm） |
BEA1000013 | 3 Prong Clamp (20mm grip) 3爪夾（爪長：20mm） |
BEA1000014 | 2 Prong Clamp (60mm grip) 2爪萬用夾（爪長：60mm） |
BEA0570181 | Fixing Clamp 固定夾 |
BEA0570191 | Flexible Coupling 柔性接頭 |
